This is topic I have a predator hunters emergency in forum Firearms forum at The New Huntmastersbbs!.
To visit this topic, use this URL:
https://www.huntmastersbbs.com/cgi-bin/cgi-ubb/ultimatebb.cgi?ubb=get_topic;f=3;t=000017
Posted by 20t-n-t (Member # 46) on February 21, 2003, 06:29 PM:
Help,,, I bent the ejector in my Sako L-461 and it can not be fixed
Does anyone have one that you will let go of??? I'm in real trouble here and can't find one any place. If so you can e-mail me at RAVENARR1@aol.com .
Thanks all
Slydog
Posted by DAA (Member # 11) on February 21, 2003, 07:43 PM:
Slydog,
installing Sako extractors on Remington bolts is a standard offering for most accuracy oriented riflesmiths. I can't say for sure that he has exactly the one you need on hand, but I'd think the guy I use for most of my custom work would have one. Here's his website where you can find his phone number and such.
http://www.bryantcustom.com/
If he doesn't have one, try calling Greg Tannel, his site is:
http://www.gtrtooling.com/
One of those guys will have what you need I'm sure.
- DAA
Posted by Jack Roberts (Member # 13) on February 21, 2003, 08:13 PM:
How do you go about bending an ejector? I can think of ways to bend an extractor, but can not figure out how to bend an ejector.
Jack
Posted by Barry (Member # 34) on February 21, 2003, 08:16 PM:
20t-n-t,You know how tempting this is dont you?By the way,you never sent me those pictures.I've got a buddy that now teaches gunsmithing here at the college but I dont know if I can reach him on the weekend.We did a few Sako conversions when I attended and always had a few around,it may be Monday.If thats ok let me know.
Posted by DAA (Member # 11) on February 21, 2003, 08:17 PM:
Ooops. I thought we were talking extractors, not ejectors. My mistake. Have to admit, I don't even know what a Sako ejector looks like? If it's anything like a Rem., Win., or Savage, then a) I want to know how you bent it and b) you should be able to fab one if you really have to.
- DAA
Posted by 20t-n-t (Member # 46) on February 22, 2003, 08:44 AM:
Sorry guys, last night I was so tired and frantic that I thought one thing and wrote another, so let me clarify..
Jack,
I had a little pressure problem and bent an extractor, not an ejector. Sorry its been one of those weeks.
Barry,
I know you are on the edge of your seat, waiting to pounce.. LOL I think I set myself up for this. You can settle back into your seat now till next time.ROFL
DAA,
You too??? seemes like everyone kicks the guy thats down, LOL Thanks for your first post with the info. The seccond one, I'm not sure how to take,LOL but realy Thanks for the help everyone.
Frantic in Idaho
Slydog
Posted by DAA (Member # 11) on February 22, 2003, 11:01 AM:
No sarcasm or hidden stuff here. Just I thought I had misunderstood, and it was actually a bent ejector problem. And that really had me scratching my head, and I wanted to know how it happened.
Decent chance of catching one of those guys in the shop today - and I'm positive one or both has the extractor you need.
- DAA
Posted by Leonard (Member # 2) on February 22, 2003, 01:50 PM:
So, what happened this time, Sly? You roll your golf cart again? ![[Big Grin]](biggrin.gif)
What's the speed limit up there?
Good hunting. LB
Posted by DAA (Member # 11) on February 27, 2003, 08:57 PM:
Slydog, saw your post on another board, and some of the replies. DO call the guy in Kansas. I know the fellow who posted that info, and he knows his Sako stuff. If he says that guy in Kansas will have your part, I'd bet that he does.
Jim Lutes (316)799-2509
Hope you get your rifle fixed soon!
- DAA
UBB.classicTM
6.3.0