This is topic knives for sale in forum Calls and Gear forum at The New Huntmastersbbs!.
To visit this topic, use this URL:
https://www.huntmastersbbs.com/cgi-bin/cgi-ubb/ultimatebb.cgi?ubb=get_topic;f=2;t=000461
Posted by trapper2 (Member # 3651) on May 25, 2014, 06:23 PM:
I had these made up and figured I would put them up for sale here, if nothing else atleast its a few more to look at.
first is one I call "three finger", its ats-34, orange g-10 handles, bed blasted, and comes with a kydex pocket sheath.
asking 140.00 shipped
next is a set of pack knives, ats-34, neoprene handles, bead blasted, double leather sheath, bigger of the two is same as fred bigger knife, smaller one is one I call a back pocket, guy should be able to do about anything he needs to do with this set
asking 275.00 shipped
Posted by Leonard (Member # 2) on May 25, 2014, 06:37 PM:
I sure like the looks of that first one. Why no lanyard hole?
Good hunting. El Bee
Posted by trapper2 (Member # 3651) on May 26, 2014, 02:59 AM:
glad you like it, can be yours and I might even knock some off since you are the top dog in this place, isn't that how they do it in big cities, gotten pay the big guy off?
I just decided not to put a thong hole in this one, if its a order they get what the guy wants, if its just one I am making then I try different stuff just to see if guys like it
Posted by Lone Howl (Member # 29) on May 26, 2014, 09:21 AM:
Nice. Looks like you have some Dozier influence in your knives?
Mark
Posted by trapper2 (Member # 3651) on May 26, 2014, 10:17 AM:
thanks guys, mark I haven't seen but a few in person but yes we do make some that are similar, I just like to make a good using knife and his seem to follow the same route. most of the ones I make are out of 3/32 and alittle smaller then most guys, but the guys I sale to seem to like them alot
Posted by Leonard (Member # 2) on May 26, 2014, 01:44 PM:
Okay, I will treat myself to a first quality custom knife.
You write me, state your price and your address and I will send you a check. It's a beauty. If Cal like your shit, it must be really good stuff.
Good hunting. El Bee
Posted by trapper2 (Member # 3651) on May 26, 2014, 05:14 PM:
leonard, I sent you a email, let me know if you don't get it, I just used the one under "contact us" at the bottom of the page, is that the one?
Posted by Leonard (Member # 2) on May 27, 2014, 07:12 AM:
Hi. Yes, got your email this morning. I need an address. LB
edit: okay, noticed the address/duh.
I'm in Yucca Valley now, be home tonight. I'm going to be hot shit, might wear this knife to church; I mean Costco. Someplace to show it off. Might have to book a hunt, need to skin something.
Good hunting. El Bee
[ May 27, 2014, 07:32 AM: Message edited by: Leonard ]
Posted by Kokopelli (Member # 633) on May 27, 2014, 08:43 AM:
El Bee;
Won't you have to wait 15 days for a knife in Calif ??
Will you have to register it ??
(Gasp) You plan to OPEN CARRY it ?? ![[Eek!]](eek.gif)
You DO have a Permit for a dangerous edged weapon, don't you ??
![[Big Grin]](biggrin.gif)
BTW; The guy wearing the headphones in the unmarked black van on your corner is filling out some paperwork and needs to know how long you have been having thoughts about guns and swords.
Posted by Leonard (Member # 2) on May 27, 2014, 09:26 AM:
It's only TEN days and the van is way down the street, this morning, with an APB on my truck...unless they accidentally tracked me to Yucca Valley.
Posted by Lone Howl (Member # 29) on May 27, 2014, 11:26 AM:
Yeah, I expect a ban on edged weapons any day now, what with this jackass that stabbed three and shot the rest in Santa Barbera this weekend.
Posted by Leonard (Member # 2) on May 27, 2014, 12:55 PM:
And, the NRA and the NKA (National Knife Association) have been roundly condemned, for their responsibility, also the lack of vegetables in the school lunch program.
I have been saying for a long time. What we really need is a virtual news black out. Quit sensationalizing these mass murders. Every damned one of these things is a copycat deal. These creeps never had an original thought but as soon as they see batman shooting up a theater, or shopping mall; "Hey, that sounds so friggin' cool, I'll show all these normal people to start taking me seriously" And, so it goes. Get rid of the guns and the knives and nobody will ever get hurt.
Anybody have statistics on vehicular homicides? We might need to control cars, next. Oh, we already do? Seriously?
Good hunting. El Bee
Posted by Kokopelli (Member # 633) on May 27, 2014, 02:05 PM:
A NEWS BLACKOUT ?????
No.....no........no, my short peckered friend. Ain't gonna happen. The liberals LOVE that Freedom of the Press amendment. The Gun Rights one,....... not so much.
It would be nice, though, if the `journalists` would mention now and then that ALL of these mass shootings are occurring in `Gun Free Zones`.
The fact is that you are safer at a gun show than you are in a gun free zone.
Posted by trapper2 (Member # 3651) on May 27, 2014, 05:59 PM:
leonard, send me your address and I will get it headed your way.
showing it off is good, Kelly wears his to the bingo hall when he's looking for hot chicks, ha
Posted by Leonard (Member # 2) on May 27, 2014, 06:21 PM:
Checks in the mail. What does CTA mean?
I'm in no particular hurry. Boy, I bet it will really be a chick magnet! In Oklahoma.
Good hunting. El Bee
Posted by trapper2 (Member # 3651) on May 28, 2014, 02:10 AM:
it only works for Kelly but you know how he is, anything works for him
its a cross with CA under it, the cross because of my faith in our Lord, the CA is my brand
Posted by Kelly Jackson (Member # 977) on May 28, 2014, 07:42 AM:
I got one of the first ones Ryan made.
When he told me he was going to to start making them, I said put me down for one. I really like the knife and the pancake type leather sheath. Dont even know its on and rides tight.
kj
Posted by Cdog911 (Member # 7) on May 28, 2014, 02:30 PM:
and it's sharp enough to lop the tip off a hand rolled cigar without leaving a single shred of tobacco leaf disturbed. That would be sweet!
Posted by Kelly Jackson (Member # 977) on May 28, 2014, 06:46 PM:
Ive V nothched a few with mine from time to time.
Posted by knockemdown (Member # 3588) on May 29, 2014, 04:24 AM:
this is my 1st Trapper2 knife, its just the right size...
And Ryan got a little snazzy with the polished bolster and filework on the spine!!!
Posted by trapper2 (Member # 3651) on May 29, 2014, 12:53 PM:
fred I'm working on acouple right now that's stainless Damascus, I think you will really like them, i'll get a pic when I'm done.
Posted by trapper2 (Member # 3651) on May 30, 2014, 05:45 PM:
heres acouple I finished tonight, first one was a order, since I was making one I figured I would make two while I was at it, first time I messed with stainless Damascus, it amazes me what they can do with that stuff in the way of patterns
Posted by Leonard (Member # 2) on May 30, 2014, 06:30 PM:
That's kinda amazing! I can't imagine how it's done? What is that handle material? I aught to know, but drawing a blank? Carnelian, maybe?
Good hunting. El Bee
Posted by trapper2 (Member # 3651) on May 30, 2014, 06:33 PM:
micarta bolsters, first one has calf buckeye burl, second I maple burl
Posted by Duckdog (Member # 3842) on May 31, 2014, 09:36 AM:
I love that bottom one Ryan! That is one nice looking knife!!
Posted by JeremyKS (Member # 736) on May 31, 2014, 05:55 PM:
They look good Ryan! When you going to make me a folder! ![[Smile]](smile.gif)
I kind of like the idea of the neoprene handles.
Posted by trapper2 (Member # 3651) on June 01, 2014, 05:14 AM:
duck for the right price it can be all yours, glad your liking the other one.
Jeremy I've made three for gifts, man without the right equipment it tough, I had to make those over at brets, till I get a bigger shop you might have to wait. I think you would like the neoprene, doesn't get slick when its wet and bloody
Posted by Duckdog (Member # 3842) on June 01, 2014, 05:28 AM:
quote:
duck for the right price it can be all yours
Ain't that the case for everything!! Not in the cards right now my friend. But, I'll have another someday! I see THAT one in a horizontal sheath. I really wanna try one of those horizontals some day. The sheath work your guy does impresses the heck out of me.
Any kind of disabled carpenter's discount?? Lol!! ![[Wink]](wink.gif)
Posted by trapper2 (Member # 3651) on June 01, 2014, 09:50 AM:
duck my wife says if I give you a disabled carpenters discount I have to add a retarded trappers tax on to it and the tax is a lot more then the discount. yea I sure like the horizontal sheath, if no one buys that knife before I get by the sheath makers that what it will get
Posted by Duckdog (Member # 3842) on June 01, 2014, 10:59 AM:
Good comeback!!! I like that!
Well, if you get that sheath made for it, post up a pic.
Posted by TOM64 (Member # 561) on June 01, 2014, 01:46 PM:
I was pretty sure I had all the knives I needed when I received my Ingrams but now I'm getting this funny feeling that one more might be needed.
Ever do any Kydex neck sheaths?
Posted by trapper2 (Member # 3651) on June 01, 2014, 03:16 PM:
tom, yea I can get a kydex neck sheath for any of them, I have only gotten them for the smaller knives so far, I have one here now in a neck sheath, this knife, different sheath
Posted by Leonard (Member # 2) on June 29, 2014, 05:20 PM:
I just got home, package in the mailbox.
This is a very nice, well made knife. I don't own anything like it.
Too tired now, but I will call Ryan tomorrow. Thank you!
Good hunting. El Bee
Posted by trapper2 (Member # 3651) on June 29, 2014, 06:56 PM:
glad you like lb, give me a call and if I don't answer lave a message so I know you called and I will holler back, phone doesn't work to good where I will be
Posted by Leonard (Member # 2) on July 02, 2014, 01:39 PM:
Finally made the connection with Ryan.
Had a nice chat about some of you'uns, (you know who you are) and got all knowed up on comings and goings, extensive dog talk, and some talk about edged blades. I think I have a new, very decent coyote case skinning tool.
Nice visit!
Good hunting. El Bee
PS, he talks like a REAL okie, too!
Posted by trapper2 (Member # 3651) on July 31, 2014, 02:32 AM:
ok guys, I got 5 of the knives with no handles and the coyote track cut out, one is in a kydex sheath just like the one above, other four don't have a clip on them, made as neck knife or to just slide in your back pocket, I need to move these so if anyone is interested I will ship them for 100.00 each, thanks
can get pics of the sheaths later if I need to
Posted by 3 Toes (Member # 1327) on July 31, 2014, 06:03 AM:
I'll take one with the clip on the sheath Ryan. I will call you later.
UBB.classicTM
6.3.0
